The L-505f was introduced in 2001 and was remarkably successful as many proud Luxman owners will happily testify. Its successor, the L-505uX, now has Luxman’s unique noise & distortion canceling technology – ODNF version 3.0 as well as the electronic input selector (trickle-down technology from the flagship C-1000f) , which has lowered channel crosstalk & increased channel separation. Best of all, it now features LECUA-WM (Luxman Electronically Controlled Ultimate Attenuator – Weight Matrix) discrete volume control based on its C-1000f preamplifier. Containing resistors that need to be painstakingly hand-measured, this is no small or inexpensive upgrade. There are no moving parts, no tracking issues, and, incredibly, the same sound no matter the volume level.

The L-505uX is a fully featured integrated amplifier, with a new even more resolute phono stage, multiple inputs (including one balanced), tone controls (easily defeated at the touch of a button, even from the remote), enough power to drive most speakers in just about any room in your home and a remote control to add convenience to a remarkably comprehensive integrated amplifier. It is a wonderful entrance to the world of Luxman.

Chassis bases have superb vibration absorption in order to suppress noise levels. The power transformer, electrolytic capacitors and amplifier output stage (see amp block below) are laid out so as not to interfere with each other. To reduce interference further, the block construction isolates each section using shielding panels, and extensive internal filtering to reject magnetic flux interference.

Luxman holds many patents for audio engineering, amongst them is the application of Global Negative Feedback to the output stage, which while widely used throughout the audio industry, they no longer use themselves.

Luxman nowadays use a distortion reduction circuit called Only Distortion Negative Feedback (ODNF). This system works by isolating noise & distortion at the output from the music signal and sparingly applying negative feedback to suppress them. Conventional negative feedback systems can have an adverse effect on the music, introducing phase distortion. “The circuit features such an ultra-wide range, ultra- high slew rate and ultra low distortion that it does not use phase compensation for the music signal amplifying circuits.” This new technology also ensures that need for a DC servo circuit is alleviated, again improving sound quality.

Input Selector

Both the L-505uX and L-507uX, feature a quality electronic selector switch, which is the heart of the C-1000f pre-amp (one of Luxman’s 80th anniversary commemoration models). The sound quality deterioration using the new electronic input switch is now minimal, while channel separation and crosstalk efficiency were raised substantially in comparison with the previous L-505f / L-509f SE. In addition the illuminated position indicator around the input selector knob, makes it much easier to view the selected position even from afar.

Volume Control – LECUA Weight Matrix

The integrated amplifiers use a motorized APLS poteniometer behind the volume knob to provide voltage to the LECUA* module. The L-505uX has a LECUA discrete volume control based on the C-1000f preamplifier design – no moving parts, no tracking issues at low volume. Much more transparent sounding and will sound the same at every level. This is the most important of all the upgrades and the most expensive to implement, as the individual resistors need to be measured by hand.

Amplifier

The amplifier section has not been ignored either; noise and distortion has been kept to a minimum with the introduction of ODNF version 2.2. The deep, rich tone is able to reveal subtle detail buried deep in the music, due to the removal of noise and distortion.

Pure Copper Cabling

Extensive listening was applied to the high purity, oxygen free copper (OFC) cables which are used to transmit the signal throughout the amplifier. These cables have a minimal audible signature and minimal electrical effect on the audio waveform. Linear wide bandwidth frequency response is achieved by the low measured values of both inductance and capacitance. The result: the cables do not color the sound, but pass it through, quickly.

Phono Pre Amplifier

Enjoy the ability to play or record your LP collection with the built-in phono stage which accommodates both Moving Magnet and Moving Coil cartridges. The MM input has approx. 35dB of gain. While the MC input has 55dB of gain (that’s a multiplication of 550x). We recommend MC cartridges with an output >.7mV. Lower than that you might consider using the MT-88 moving coil step-up transformer.

Subsonic Filter

A subsonic filter is also easily accessible on the remote control in order to remove unwanted low frequency noise while you are listening to a record. When the stylus hits the groove, you might notice the woofers modulating in and out, even though there is no music playing yet. This is due to the ultra low frequency information (below the music), this unnecessary information places a strain on the amplifier and is best filtered out. A mono switch is also available for both loudspeaker setup as well as mono record playback.

Headphone Amplifier

There is also a high quality headphone amplifier, accessible from the front panel. You can turn off the speaker output by a simple click of the Speaker Selector.

Two Pairs of Speaker Terminals

Large speaker terminals for driving two individual sets of speakers. At the turn of the speaker switch, it is possible to change between the two pairs of speakers easily. In addition, if the A+B function is used; Takasina capacitors are used to parallel the output which permits bi-wiring a single pair of speakers.

Power Meters

The large-sized power meters, calibrated in decibels are easy to read even from a distance. The logarithmic compression system is easy to grasp and also how this applies to the music. The meters are calibrated from -60dB below full rated power to +3dB above rated power. An 8mm thick acrylic covers the meters, which are normally backlit, though the illumination may be turned off from the remote control.

Remote Control

Easy to use, intelligently laid-out, aluminum remote control; all of the primary functions of the L-505u, including power on / off can be controlled from the comfort of your listening chair. Besides the electronic volume control, there is also a mute feature. The display meter’s back light can also be turned on / off from the remote control.

Tone Controls

The tone controls might seem like an anachronism in this day and age of minimalism, but they can be remarkably effective in bring to life a less than perfect music collection. We all have music gems in our collection that are sonically challenging. A lot of the 1980’s CDs are quite harsh sounding and the digital glare can be quite fatiguing. Reduce the treble slightly and while the harsh CD is not going to suddenly sound like a reference recording, at least it will now be perfectly listenable. Sit back relax, enjoy the music and forget about the hi-fi. When you want to bypass the tone controls, just engage the Line Straight switch on the front panel or on the remote control.

NOTE: You might also use the Tone Controls for room acoustics’ correction. They are in effect simplified room equalization controls.

* LECUA is short for Luxman Electronically Controlled Ultimate Attenuator.

* ODNF is short for Only Distortion Negative Feedback.

Item Value
Continuous Outputs 100W+100W (8Ω), 150W+150W (4Ω)
Input line x 4, phono x 1 (MM/MC) balance: line x 1, recording input/output x 1, separate inputs x 1
Loudspeaker Output A, B System (A+B output)
Amplifying Circuit Output ODNF2.3, bipolar, parallel, push-pull
Input Sensitivity / Impedance Phono (MM): 2.5mV / 47KΩ, PHONO (MC): 0.3mV / 100Ω, LINE: 180mV / 47KΩ
Harmonic Distortion 0.005% or less (1KHz/8Ω), 0.04% or less (20Hz~20KHz/8Ω)
Frequency response 20Hz~100KHz (+0, -3.0dB)
Signal-to-Noise LINE: 105dB
Power Consumption 270W (rated output), 85W (no signal), 0.4W (idle)
Dimensions (W x H x D) 440 ×178 ×454 (mm)
Net weight 22Kg
Accessories Remote Control (RA-17), Power cable (JPA-10000: polarity marked)

Product Documentation

Frequently Asked Questions

Reviews


There are no reviews yet.

Be the first to review “Luxman L-505uX Integrated Amp”

Press Reviews

Awards

No items found