Artesania Exoteryc Rack Features
A stainless steel, anti-magnetic structure supports a specially treated base to set up a turntable or other components.
Stainless steel top attachments on rack uprights
Each top is made with conical recess to support the spikes of the turntable platform.
The external structure is made of metal filled with special particles and elastomers. The uprights have a diameter of 60 mm / 2.36 in. These factors create a rack heavy, resistant and stable. The resonance coefficient of the structure is significantly lowered. The paint used is textured for diffusion purposes.
Internal Suspended Structure
Isolated from external structure. Eliminates vibrations that are transmitted from solid and acoustic sources through the creation of decouples; steel needles supported on isolating discs. These provide extra tiers of anti-resonant protection. This suspended audio rack has a triple decoupling.
These frames are adjustable in height to place any size of component properly. They are locked on the vertical stainless steel bars of the suspended structure.
Support the internal structure and isolates from the external structure. (Diameter 38 mm/1.49 in)
To connect electronics (essential for phono).
Height variable rear rods strengthen the external structure to guarantee stability and ensure free easy access to install components.
Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change. This system allows to set up the best support position to place electronic components.
Support each of the electronic components (without any need for shelves). Easy installation facilitated by an elastic insert which provides stability to place electronic components on the adjustable spikes.
Located in the internal structure they stop the tiniest pendular movement of the internal structure. Four in each rack, located at the lowest part of the internal structure.
Stainless steel discs support the spikes of the uprights. Two types of floor pads are included, with different sonic behavior, depending on the room acoustics. Check manual to use the proper pads for the bases.
Special anti-magnetic & anti-vibration 5 lb dampers—one damper for each level to avoid parasitic vibrations.
Decoupling Bases & Damping pads
Includes set of 4 stainless steel decoupling bases with 2 sets of floor pads— neoprene and white teflon discs to use depending on room acoustics treatment.
Includes neoprene and white teflon discs to use depending on room acoustics treatment.
Gunmetal is the standard color. For black or silver, there is a 10% up charge.