Artesania Prestige Rack Features

Platform

A stainless steel, anti-magnetic structure supports a specially treated base to set up a turntable or other components.

Stainless steel top attachments on rack uprights

Each top is made with conical recess to support the spikes of the turntable platform.

External Structure

It ́s made of metal filled with special particles and elastomers. The uprights have a diameter of 60 mm. These factors create a rack heavy, resistant and stable. The resonance coefficient of the structure is significantly lowered. The paint used is textured for diffusion purposes.

Internal Suspended Structure

Isolated from external structure. Eliminates vibrations that are transmitted from solid and acoustic sources through the creation of decouples; steel needles supported on isolating discs. These provide extra tiers of anti-resonant protection. This suspended audio rack has a triple decoupling.

Internal Frame

These frames are adjustable in height to place any size of component properly. They are locked on the vertical stainless steel bars of the suspended structure.

Teflon Cylinders

Support the internal structure and isolates from the external structure. (Diameter 30 mm)

Earth Terminal

To connect electronics (essential for phono).

Bridge Bar

Height variable rear rods strengthen the external structure to guarantee stability and ensure free easy access to install components.

Linear Arms

Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change. This system allows to set up the best support position to place electronic components.

Isolation Discs

Support each of the electronic components (without any need for shelves). Easy installation facilitated by an elastic insert which provides stability to place electronic components on the adjustable spikes.

Decoupling Base

Stainless steel discs support the spikes of the uprights. Two types of floor pads are included, with different sonic behavior, depending on the room acoustics. Check manual to use the proper pads for the bases.

Accessories included

Dampers

Special anti-magnetic & anti-vibration 5 lb dampers—1 damper for each shelf to avoid parasitic vibrations.

Decoupling Bases & Damping pads

Includes set of 4 stainless steel decoupling bases with 2 sets of floor pads— neoprene and white teflon discs to use depending on room acoustics treatment.

Isolation discs

Includes neoprene and white teflon discs to use depending on room acoustics treatment.

Finish

Gunmetal is the standard color. For black or silver, there is a 10% up charge.