Since 1925, Luxman are not about mass-produced products designed in Japan, then assembled in China from generic parts. Rather Luxman products are designed in Japan, then each part is carefully tested and evaluated. Many parts are custom-made for them which really does make these designs special. The transformers are made in Japan to their specification. Luxman selects the color paint used on the resistors (to identify value & tolerance) based on extensive listening tests. The chassis is carefully tuned, both vibration and resonance are carefully controlled; they perform like a musical instrument. Finally assembly & testing is all carried out in Japan. The Japanese attention to detail is fantastic—the amplifiers come wrapped in a cloth shroud with elastic underneath and all of the RCA and XLR sockets are protected from oxidation with individual plastic sleeves. Even the power cord is a cut above the normal give-away and actually sounds good. No wonder Luxman achieves such a superior sound.

Fit and finish is exquisite; Luxman’s craftsmen take great pride in both the aesthetic and sonic presentation.

Two Inputs

Luxman’s highest quality phono stage allows the music lover to choose between two independent tonearm / cartridge inputs from the front panel. Adjustable input impedance.

Articulator (Demagnetizer)

Over time, the various parts of the inner assembly of moving coil cartridges experience a build-up of magnetic energy, resulting in a veiling of detail, even a loss of dynamics and upper-octave resolution. Demagnetizing the cartridge removes the excess, often bring back a cartridge’s sense of “presence” and “life”.

We routinely demagnetize our moving coil cartridges every six or seven months as general maintenance. We don’t recommend this device for use with moving magnet cartridges, however.

Engage the “Articulator” switch, wait a few moments, and it’s done!

Line Phase Sensor

Here is a clever device found on the back of every Luxman powered product. You press the button and it will check the phase of the electricity it is receiving. If the AC outlet in the wall is incorrectly wired, meaning the live and neutral are swapped, a red LED will turn on to warn you. You only need to press it once, when you are installing a product to check that everything is in order. It’s a simple mistake that occurs often and can seriously undermine your listening enjoyment.

Luxman’s Transformers are hand crafted in Japan for the North American Voltage.

System MM/MC independent NF type [ikoraiza] +CR type
Input sensitivity 4mV 0.2mV
Input Impedance: Low 34kΩ 28Ω
Input Impedance: Mid 50kΩ 106Ω
Input Impedance: High 75kΩ 560Ω
Gain 1KHz 36dB 62dB
RIAA curve deviation 30 – 20KHz ±0.2dB
20 – 100KHz ±0.5dB
Output voltage 1KHz 250mV
Output impedance 230Ω
Signal-to-Noise Ratio IHF-A 103dB 83dB
Channel separation 10KHz Above 90dB
Electric power consumption 11W
Dimensions 18.4 (W) x 3.2 (H) x  15.9” (D)
Weight 20 lbs. net

Frequently Asked Questions


There are no reviews yet.

Be the first to review “Luxman E-1 Phono Stage”

Press Reviews


No items found